Select site:
- English
LPC2212/2214
General description
The LPC2212/2214 are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128/256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.
With their 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels and up to nine external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. Number of available fast GPIOs ranges from up to 76 pins (with external memory) through up to 112 pins (single-chip). With a wide range of serial communications interfaces, they are also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.
Remark: Throughout the data sheet, the term LPC2212/2214 will apply to devices with and without the /00 or /01 suffixes. The /00 or the /01 suffix will be used to differentiate from other devices only when necessary.
Features
Key features brought by LPC2212/2214/01 devices
- Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device. They also allow for a port pin to be read at any time regardless of its function.
- Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are 5 V tolerant when configured for digital I/O function(s).
- UART0/1 include fractional baud rate generator, auto-bauding capabilities and handshake flow-control fully implemented in hardware.
- Buffered SSP serial controller supporting SPI, 4-wire SSI, and Microwire formats.
- SPI programmable data length and master mode enhancement.
- Diversified Code Read Protection (CRP) enables different security levels to be implemented. This feature is available in LPC2212/2214/00 devices as well.
- General purpose timers can operate as external event counters.
Key features common for all devices
- 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package.
- 16 kB on-chip static RAM and 128/256 kB on-chip flash program memory. 128-bit wide interface/accelerator enables high speed 60 MHz operation.
- In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. Flash programming takes 1 ms per 512 B line. Single sector or full chip erase takes 400 ms.
- EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution.
- Eight-channel 10-bit ADC with conversion time as low as 2.44 us.
- Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real-Time Clock and Watchdog.
- Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s) and two SPIs.
- Vectored Interrupt Controller with configurable priorities and vector addresses.
- Configurable external memory interface with up to four banks, each up to 16 MB and 8/16/32-bit data width.
- Up to 112 general purpose I/O pins (5 V tolerant). Up to nine edge or level sensitive external interrupt pins available.
- 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop with settling time of 100 ms.
- On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
- Two low power modes, Idle and Power-down.
- Processor wake-up from Power-down mode via external interrupt.
- Individual enable/disable of peripheral functions for power optimization.
- Dual power supply:
- CPU operating voltage range of 1.65 V to 1.95 V (1.8 V +- 0.15 V).
- I/O power supply range of 3.0 V to 3.6 V (3.3 V +- 10 pct) with 5 V tolerant I/O pads.
Products/packages
| Type number | Orderable part number | Ordering code (12NC) | Product status | Package | Packing | Marking | Chemical content | Leadfree conversion date |
|---|---|---|---|---|---|---|---|---|
| LPC2212FBD144/01 | LPC2212FBD144/01,5 | 9352 848 92551 | Volume production | SOT486-1
(LQFP144) | Tray Dry Pack, Bakeable, Single | Standard Marking | LPC2212FBD144/01
| Always Pb-free |
| LPC2214FBD144/01 | LPC2214FBD144/01,5 | 9352 848 93551 | Volume production | SOT486-1
(LQFP144) | Tray Dry Pack, Bakeable, Single | Standard Marking | LPC2214FBD144/01
| Always Pb-free |
Products in the above table are all in production. Some variants are discontinued; click here for information on these variants.
Pricing/ordering/availability
| Type number | Ordering code(12NC) | Orderable part number | Indicative price/unit($) | Region | Distributor | In stock | Order quantity | Inventory date | Buy online | Samples |
|---|---|---|---|---|---|---|---|---|---|---|
| LPC2212FBD144/01 | 9352 848 92551 | LPC2212FBD144/01,5 | 9.7900 | NA | DIGI-KEY CORPORATION | 449 | 7/3/2009 | Buy online | Order samples | |
| NA | MOUSER ELECTRONICS | 197 | 7/4/2009 | Buy online | ||||||
| LPC2214FBD144/01 | 9352 848 93551 | LPC2214FBD144/01,5 | 10.8000 | NA | ARROW ELECTRONICS | 995 | 7/2/2009 | Buy online | Order samples | |
| NA | DIGI-KEY CORPORATION | 151 | 7/3/2009 | Buy online | ||||||
| NA | MOUSER ELECTRONICS | 41 | 7/4/2009 | Buy online | ||||||
| NA | FUTURE ELECTRONICS | 3,692 | 7/3/2009 | Buy online | ||||||
| NA | AVNET ELECTRONICS MARKETING | 1,102 | 7/2/2009 | Buy online |
Design support
Application Notes
AN10689_1;
Full-duplex software UART for LPC2000 (2008-01-18)AN10389_1;
Getting started uClinux with LPC22xx (2007-02-16)AN10576_1;
Migrating to the LPC2300/2400 family (2007-02-05)AN10381_1;
Nesting of interrupts in the LPC2000 (2005-06-06)AN10254_2;
Philips ARM LPC microcontroller family (2004-10-25)AN10331_1;
Philips LPC2xxx family phase lock loop (2004-11-01)AN10605_1;
Running eCos on LPC2214 (2007-08-23)AN10256_2;
Using IAP for LPC2000 ARM devices (2004-10-25)AN10256_2;
Using IAP for LPC2000 ARM devices (2004-10-25)AN10302_3;
Using the Philips LPC2000 Flash utility with the Keil MCB2100 and IAR LPC210x Kickstart evaluation boards (2004-06-10)AN10413_2;
uC/OS-II Time Management in LPC2000 (2007-07-18)
Support Documents
LPC2000_Series_Secondary_Bootloader;
AN10835 - LPC2000 series secondary bootloader source code (2009-05-27)75016543;
An industry-leading portfolio of cost-effective, power-saving solutions for major home appliances (2008-06-01)ES_LPC2212_01_1;
Erratasheet LPC2212/01 (2007-07-27)ES_LPC2214_01_1;
Erratasheet LPC2214/01 (2007-07-27)TN06004_LPC2000_ADC;
LPC2000 ADC code example (2006-03-27)TN06005_LPC2000_I2C;
LPC2000 I2C slave code example (2006-04-21)TN06008_LPC2000_SPI;
LPC2000 SPI slave code example (2006-06-16)UM10114_3;
LPC21xx and LPC22xx User manual (2008-04-11)2212;
LPC2212 Erratasheet (2005-05-17)2214;
LPC2214 Erratasheet (2006-05-17)75013969;
LPC221x family (2004-10-01)75016725;
Microcontroller Brochure - April 2009 (2009-04-04)75016669;
Microcontroller Line Card - April 2009 (2009-04-04)uboot;
U-boot quick start guide (2007-02-15)Parametrics/similar products
| Type number | Package | Power supply | RAM(bytes) | SPECIAL FEATURES | ADCs | I/O pins | Operating temp.(Cel) | Timers | PWMs | Memory Type | Serial Interfaces | No. of Pins | Operating Frequency(MHz) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LPC2212FBD144/01 | SOT486-1
(LQFP144) | 1.8V / 3.3V | 16KB | Ext. Mem. Ctrl. | 8-ch 10-bit | 112 | -40 to +85 | 2x32-bit + RTC + WDT | 6-ch PWM | 128KB Flash | 2xUART, 1xSPI,1xSSP, 1xI2C | 144 | 0~60 |
| LPC2214FBD144/01 | SOT486-1
(LQFP144) | 1.8V / 3.3V | 16KB | Ext. Mem. Ctrl. | 8-ch 10-bit | 112 | -40 to +85 | 2x32-bit + RTC + WDT | 6-ch PWM | 256KB Flash | 2xUART, 1xSPI,1xSSP, 1xI2C | 144 | 0~60 |
Similar products
LPC2212/2214
links to the similar products page containing an overview of products that are similar in
function or related to the type number(s) as listed on this page.
The similar products page includes products from the same catalog tree(s),
relevant selection guides and products from the same functional category.
Disclaimer
The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.
The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.
As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.
- http://www.philips.semiconductors.com use http://www.nxp.com
- http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
- sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)
The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.